[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED]

BILL HOLLAND: Okay, so now that we've successfully installed the card, let's see how it sounds.

[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED, EXPLORING DIFFERENT PATCHES]

Now, supposedly there are eight banks in here. I'm having a little bit of trouble figuring out how to actually navigate between the banks. I found the patches, there are 128 of them that I can cycle through, and they range from the more ambient stuff there to more traditional synth pop type stuff.

[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED]

So you can see I can scroll through the patches fine. What I'm having trouble with is figuring out how to switch up the banks. The bank command is right here, but if I go to load it still gives me the patches to choose from. I don't really get the bank choices. The manual says to use knob 3 with layer A on; I can't seem to get that to work either, so for the moment we're going to be satisfied with the normal patches we have on here.

[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED]

Now we have a variety of other things. You can go through all the patches, pretty much see what's in there...,

[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED]

...more of a bass sound...,

[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED]

...and we have all the parameters right here to tweak on the fly.

[BILL HOLLAND PLAYING ON THE UF50 WITH A NANO WALDORF MODULE INSTALLED]

For the moment that's the UF50. I'm going to come back in a little bit after calling tech support to figure out why we can't access the banks, and then I'm going to take a look at using this both as a controller and a standlone keyboard, but for now I'm Bill Holland and this is Gearwire.Com.