MXR EVH Phase 90
Features:
- Rate control knob
- Script switch selects between standard and vintage Phase 90 sounds
- On/off switch and status LED
- Standard 1/4-inch input/output jacks
- Runs on 9V battery or MXR adapter (negative-center polarity)
DAN AGOSTO: Hi. Welcome to Gearwire.Com. We’re taking a look at the MXR Phase 90 EVH. That’s the standard Phase 90 but it’s an Eddie Van Halen signature edition. It just has an extra setting. So let’s take a look at the pedal.
As you can see, we got the Eddie Van Halen design all over the box and also all over the pedal. Here’s the instruction manual. Let’s take a look inside. All right, just basic instructions on different settings and how to power it. You also get the registration card that you send off to Dunlop for your warranty. Here is an MXR catalog. Of course, the first one on there is the EVH and then we have all the other pedals that MXR carries along with the DC Brick, which is a pedal power. They have an additional advertising for that here. And then a Cry Baby catalog, just all the different Cry Baby wah pedals that Dunlop makes all in one catalog.
Let’s take a look at the pedal. Of course it’s got that Eddie Van Halen signature design on it. Just like the Phase 90, it comes with this little rubber washer that fits over the knob. You put it on there to protect the knob. Some people also put it on there and it makes it easier to control the knob with your foot while you’re onstage playing. So, that’s useful. I’m gonna leave it off the side for now. You got two standard inputs -- or two standard 1/4” jacks, one input, one output, true bypass toggle switch. You turn it over, you see these four screws. If you take that off, the bottom will come off and that’s where you throw the battery. I can do that right now. Also there is an input for an adaptor. You can also use that DC Brick if you were to purchase that. That’s the MXR Phase 90 EVH or Eddie Van Halen Edition out of the box.
All right. We’re taking a look at this MXR Phase 90 EVH Edition. We got it plugged in and ready to go. I’m playing a Fender American Standard Telecaster. It’s going into the Marshall JCM2000 half stack, and that’s mic’ed up with a Shure SM57. So let’s take a listen to the sound that we’re getting with the pedal not active.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 BYPASSED]
I’m going to go ahead and turn this on.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
So, we’re getting a pretty phasey sound there. It’s pretty deep. We don’t really have control over how deep it goes. All we have is this one knob, and if we turn it down, that’s just basically going to turn down the speed. That’s the speed.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
You can also go fast.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
The only other control we have on here and the only think that makes this Eddie Van Halen version different from the Phase 90 is this Script button. Basically what that does is it changes the circuit into the older type of MXR Phase 90 that Eddie Van Halen used to use. Let’s see what that sounds like.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
Let’s turn it back off and try to hear the difference.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
All right. It’s very slight. I’m not sure if you noticed it but the script is actually lowering the amount of depth that the phase shifter is sweeping through, just making it slightly less intrusive. If we would turn this up, I think the difference would be more apparent. Here’s with it off.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
That’s a bit easier to hear. So basically it’s just making this a less extreme effect and that’s how Eddie Van Halen liked it. So, let’s play this out just a little bit.
[DAN AGOSTO PLAYING THE FENDER AMERICAN STANDARD TELECASTER THROUGH A MARSHALL JCM2000 AND SHURE SM57 WITH THE DUNLOP MXR EVH PHASE 90 ENGAGED]
All right. That’s the MXR Phase 90 EVH. Thanks for checking it out here with me at Gearwire.Com.





This is the coolest phaser
Post new comment